Micromod MOD: 1800P - MOD 30ML Identity Module (Version 2) PID and Ramp/Soak Functions User Manual
Page 58

Continuous Control Functions
RAMP SOAK BLOCK
3-18
201
Segment 1 Time Interval (TIS1)........................................................................................ CWR
Time that this segment will take to execute. Default value is 0. The Ramp Rate is determined
from the Time Interval and the difference between the Start Value and the first Target Value or
between Target Values. SOAK is displayed when Target Values are the same. STEP is
displayed if the Time Interval is zero. A calculated time rate is displayed otherwise. Time units
may be Seconds, Minutes, or Hours.
...
...etc 2 through 35
300
Segment 36 Time Interval (TIS36).................................................................................... CWR
Time that this segment will take to execute. Default value is 0. The Ramp Rate is determined
from the Time Interval and the difference between the Start Value and the first Target Value or
between Target Values. SOAK is displayed when Target Values are the same. STEP is
displayed if the Time Interval is zero. A calculated time rate is displayed otherwise. Time units
may be Seconds, Minutes, or Hours.
301
Segment 1 Guaranteed (GTS1) ........................................................................................ CWR
Indicates if the segment is a guaranteed segment. Default is No.
NO
0
NO indicates segment is not guaranteed. No comparison is made
between the Process input value and the result to prevent the profile
from continuing. Default is NO.
YES
1
YES indicates the segment is guaranteed. See Section 3.2 for a
description of Guaranteed Ramp, Step and Soak.
...
...etc 2 through 35
400
Segment 36 Guaranteed (GTS36) ................................................................................... CWR
Indicates if the segment is a guaranteed segment. Default is No.
NO
0
NO indicates segment is not guaranteed. No comparison is made
between the Process input value and the result to prevent the profile
from continuing. Default is NO.
YES
1
YES indicates the segment is guaranteed. See Section 3.2 for a
description of Guaranteed Ramp, Step and Soak.
401
Segment 1 State A (SAS1) ................................................................................................ CWR
Status of State A during segment.
FALSE
0
A blank box indicates State A for this segment is FALSE. Default is
FALSE.
TRUE
1
An X in the box indicates State A for this segment is TRUE.
...
...etc 2 through 35
500
Segment 36 State A (SAS36) ............................................................................................ CWR
Status of State A during segment.
FALSE
0
A blank box indicates State A for this segment is FALSE. Default is
FALSE.
TRUE
1
An X in the box indicates State A for this segment is TRUE.