Micromod MOD: 1800P - MOD 30ML Identity Module (Version 2) PID and Ramp/Soak Functions - Manual (Page 53)

Continuous Control Functions
RAMP SOAK BLOCK
3-13
15 Result Quality (RQ)............................................................................................................. -WR
Quality of Result when Bad Inputs are REJECTED.
GOOD 0 If all of the inputs are good, then the ramp soak block updates the
Result and the quality is set good. If bad inputs are accepted, then
the Result Quality is set good.
BAD 1 If any of the inputs are bad, then the ramp soak block does not
update the Result and the Result quality is set bad.
16 State A (SA) ........................................................................................................................CWR
This value will be the status of State A for the current segment.
17 State A Quality (SAQ) ......................................................................................................... -WR
Quality of State A when Bad Inputs are REJECTED.
GOOD 0 If all of the inputs are good, then the ramp soak block updates State
A and the quality is set good. If bad inputs are accepted, then State A
Quality is set good.
BAD 1 If any of the inputs are bad, then the ramp soak block does not
update the State A and the State A quality is set bad.
18 State B (SB) ........................................................................................................................CWR
This value will be the status of State B for the current segment.
19 State B Quality (SBQ) ......................................................................................................... -WR
Quality of State B when Bad Inputs are REJECTED.
GOOD 0 If all of the inputs are good, then the ramp soak block updates State
B and the quality is set good. If bad inputs are accepted, then State B
Quality is set good.
BAD 1 If any of the inputs are bad, then the ramp soak block does not
update the State B and the State B quality is set bad.
20 State C (SC)........................................................................................................................CWR
This value will be the status of State C for the current segment.
21 State C Quality (SCQ)......................................................................................................... -WR
Quality of State C when Bad Inputs are REJECTED.
GOOD 0 If all of the inputs are good, then the ramp soak block updates State
C and the quality is set good. If bad inputs are accepted, then State C
Quality is set good.
BAD 1 If any of the inputs are bad, then the ramp soak block does not
update the State C and the State C quality is set bad.