Liquid Controls LCR 600 Setup & Op - Manual (Page 8)

8
IntroductIon - lcr 600 InStrumentS and controlS
fIeld edIt WIndoWS
Some LCR 600 fields require a specific alphanumeric
entry. For these fields, the LCR 600 will open a small box
at the bottom of the screen where text, numbers, and
characters can be entered using the keypad.
To enter a value in a field edit box:
1. Enter text, numbers, or characters using the multitap
functionality of the keypad’s 10 alphanumeric buttons.
2. Press the EntEr button to accept the value.
lISt box WIndoWS
Some LCR 600 fields only have a limited number of
possible values. These fields use list box windows to
display all of the possible values.
To select a value in a list box:
1. Move the pointer  to your desired value using the 
and  buttons.
2. Press the EntEr button to accept the value.
List Box Window after selecting
Calibration Type
field
Calibration Screen
Pointer on the Calibration Type
field
Field Edit Window after selecting
Calibration Name
field
Calibration Type List Box
Calibration Name Field Edit Box
Press the PREV/ESC button to exit
any list box or field edit window with changing its value
Throughout this manual, the type of edit box for
LCR 600 field is included with the field definition.
fE - field Edit Box
LB - List Box