Liquid Controls LCR 600 Setup & Op - Manual (Page 4)

4
IntroductIon - lcr 600 overvIeW
lectrocount lcr 600 overview
general InformatIon
This manual provides instructions for the initial setup,
the calibration, and the operation of the LectroCount
LCR 600. The Liquid Controls LectroCount LCR 600
is a microprocessor-based electronic meter register.
Its primary functions consists of configuring the meter
system to the properties of the liquids to be measured,
interfacing with the electronic components of the meter
system components (and external components such
as pumps, injectors, and shutdown devices), and
performing Weights & Measures approved custody
transfer actions.
The LCR 600 performs well in mobile and fixed
installations. It can control a meter system as a stand-
alone unit or used as a slave to a host controller such
as a process controller or an in-cab data management
system.
The LCR 600 is a self-contained unit. All operation,
setup and configuration functions can be entered using
the LCR 600’s red selector switch and the alphanumeric
keypad. No lap pads, laptops, or other data entry
devices are required.
A point-of-sale upgrade or POS is available for the
LCR 600. The POS upgrade gives the LCR 600 the
ability to print tickets with pricing, taxes, discounts, and
miscellaneous charges at delivery sites.
baSIc functIonS
• Calibration (single and multipoint)
• Weights & Measures custody transfer
(product delivery and ticket generation)
• Metrological data collection
• Presetting by volume
• Multiple production selection
• Four delivery screens
• Security settings
• Air and vapor elimination (with proper
accessories)
• Valve control (with proper accessories)
• Electronic temperature volume compensation
(ETVC) (with proper accessories)
poS upgrade functIonS
• Cash and volume discounting
• Multiple tax structures
• Priced and taxed tickets
• 16 product calibrations
• 100 product names
• Presetting by price