Liquid Controls LCR 600 Setup & Op - Manual (Page 10)

10
Delivery Screen Pointer
on the Next/Previous Screen line
in position for a screen change
Configuration Menu
navIgatIng from Screen to Screen
The LCR 600 contains nine groups of screens: Delivery
Setup, General Setup, System Setup, Calibration Setup,
Diagnostics, Security, Setup POS, Advanced Features,
and Machine Status. Once a group of screens is
opened, you can rotate through the screens in the group
using the Next/Previous Screen
field at the bottom
of the screen.
Two additional screens, independent of the nine groups,
are essential to operating and navigating the LCR 600,
the Delivery Screen and the Configuration Menu.
The Delivery Screen is opened when the red selector
switch is turned to the RUN position. Once the Delivery
Screen is open, the three Delivery Setup screens can
be opened using the Next/Previous Screen
field.
The Configuration Menu serves as a hub for opening
the other eight groups of screens. It is included in the
rotation of each group of screens. The Configuration
Menu also opens when the red selector switch is turned
to the calibration position.
To move from one screen to another:
1. Move the pointer to the bottom line of the screen: Next/
Previous Screen
2. Press the nExt or the PrEv button to navigate to the
next screen or the previous screen.
------------- or -------------
1. Move the pointer to any field in the Configuration Menu
screen.
2. Press the EntEr button to open the screen.
IntroductIon - lcr 600 InStrumentS and controlS
Press PREV/ESC button while pointer
is on the Next/Previous Screen line
to navigate to the previous screen
Press NEXT/ENTER button while pointer
is on the Next/Previous Screen line
to navigate to the next screen
In any LCR 600 screen, turning the selector switch to RUN will
bring up the delivery screen and begin a delivery.
Delivery Screen fail-safe