Liquid Controls LCR 600 Setup & Op - Manual (Page 45)

45
operatIon - delIvery ScreenS
delivery Screens
After switching the selector switch to RUN, one of four delivery screens will appear on the screen—Detailed Pump
& Print, Volume and Preset, Aviation, and POS Delivery. Most fields in the delivery screens are display only. Without
the LCR 600 POS upgrade, the only editable fields are the preset fields. With the POS upgrade, the POS Delivery
screen contains editable fields that effect the pricing configuration printed on the delivery ticket. To change the delivery
screen, use the
delivery Screen
field on the System Setup 2 screen.
detaIled pump & prInt
avIatIon
volume and preSet
detaIled pump & prInt
Calibration details - Display Only
The calibration number, calibration code, calibration
name, and calibration type of the active calibration
Net Preset: (fE)
u - l - p
Preset value according to net volume.
This field will be
named Gross Preset
when the active calibration is
not temperature compensated.
Temperature: Display only
The current temperature reading of the RTD temperature
probe.
Flow Rate: Display Only
The current flow rate through the meter.
Net Totalizer: Display only
Net volume delivered by the LCR 600. In the calibration
position, the field can be set to any positive value. The
value resets after a clear all.
This field only appears
when the calibration is temperature compensated.
Gross Totalizer: Display only
Gross volume delivered by the LCR 600. In the
calibration position, the field can be set to any positive
value. The value resets after a clear all.
avIatIon
∆P:
Display only
The current differential pressure. Field only shown if the
LCR 600 is connected to a
∆P transducer.
volume and preSet
Product #:
Display only
The active product number.