Remove the access cover, Wiring connections overview, Connect to power – Hach-Lange POLYMETRON 9610 sc SiO2 Operations User Manual
Page 13

Remove the access cover
Remove the access cover to connect to the wiring terminals. Refer to
Figure 11 Access cover removal
Wiring connections overview
shows all of the possible wiring connections. Make sure to use
the wire gauge that is specified for the connection (refer to
on page 3).
Figure 12 Connections on the main circuit board
1 Dual monitor
connection
4 Digital inputs
7 Power out
2 Smart probe
connection
5 Power in
8 Power out LED (on =
power is connected to
the analyzer)
3 4–20 mA outputs
6 Power switch and
LED (on = analyzer is
on)
9 Relays
Connect to power
W A R N I N G
Electrocution hazard. Use a crimp-on ring terminal on the main
protective earth connection.
English 13
This manual is related to the following products: