Beltpac tone settings – Clear-Com BS850 (Last time buy) User Manual
Page 39

36
Beltpac Tone Settings:
You can change the Beltpac Tones from the Configure tab>Edit Beltpac Tones
box>Beltpac>Tones path as shown below:
Select the events for which you would like tones to sound in that Beltpac user’s headset. Each
Beltpac can have its own tone configuration.
• Battery tone – When enabled, low battery warning tones will be heard.
• Confirm tone – Not presently used; leave enabled.
• Error tone – When enabled, busy signals and connection rejection tones will be heard.
This should be left enabled for normal operation, especially when Beltpacs are sharing
frequencies (PTS mode).
• Alert tone – When enabled, an alert tone will be heard as confirmation that the alert was
received by the base.
• Call tone – When enabled, call tones will be heard when sent by other users.