Clear-Com i-Series Panels - Manual (Page 45)

increment. The selected volume level is highlighted in the display. You can also change
the volume level by rotating the VOL/PROG knob.
When you reach the desired volume level, press either the ENTER key (labeled “#GRN”),
or press the VOL/PROG knob in, as if it were a key, to save the information. Then exit
“local preferences” mode.
The default outgoing microphone audio level is the highest possible level of +7 dB.
As you scroll through the volume-level scale, you will hear the gooseneck microphone’s
volume level change accordingly. To make the change permanent however, you must
select the desired value on the scale by either pressing in the VOL/PROG knob or by
pressing the ENTER key (labeled “#GRN”) when the value appears in the display.
Note:
If you change this parameter locally, the EHX software can only change It by performing a
black reset. Otherwise, the EXH sotware can download changes without a black reset.
Headset Microphone Volume Level
When you select Headset Microphone Volume Level from the menu, the leftmost display
on the panel shows the current headset microphone volume level, with choices for
increasing or decreasing it. For example, the display may read:
Set HS Mic Volume Level
+2 dB with increase/decrease choices of:
(+7,+6,+5,+4,+3,+2,+1,0,-1,-2,-3,-4,-5,-6,-7,-8)
In the example above, the current headset volume level is 2 dB. To increase the volume,
you press the ANSWR key, and to decrease the volume, you press the CLEAR key. Each
time you press either the ANSWR or CLEAR key, you change the volume level by one
increment. The selected volume level is highlighted in the display. You can also change
the volume level by rotating the VOL/PROG knob.
When you reach the desired volume level, either press the ENTER key (labeled “#GRN”),
or press the VOL/PROG knob in, as if it were a key, to save the information. Then exit
“local preferences” mode.
The default outgoing microphone audio level is the highest possible level of +7 dB.
As you scroll through the volume-level scale, you will hear the headset microphone’s
volume level change accordingly. To make the change permanent however, you must
select the desired value on the scale by either pressing in the VOL/PROG knob or by
pressing the ENTER key (labeled “#GRN”) when the value appears in the display.
Note:
If you change this parameter locally, the EHX software can only change It by performing a
black reset. Otherwise, the EXH sotware can download changes without a black reset.
Sidetone Volume Level
When you select Sidetone Volume Level from the display, the leftmost display on the
panel shows the current sidetone level, with choices for increasing or decreasing it. For
example, the display may read:
Set Sidetone Volume Level
+10 dB with increase/decrease choices of:
(+30, +28, +26, +24, +22, +20, +18, +16, +14, +10, +8, +6, +4, +2, 0)
45 I-Series Panels User Guide