Clear-Com i-Series Panels - Manual (Page 31)

5.2 Turning the gooseneck microphone on and off
The gooseneck microphone key (GN MIC) on the function module turns your panel’s
gooseneck microphone on or off.
Press once to turn the microphone on. Press again to turn the microphone off.
If you press a talk key while the gooseneck microphone is plugged in but off, the
gooseneck microphone automatically turns on for the duration of the call.
The GN MIC key is lit:
•
Dim green whenever the gooseneck microphone is present but off.
•
Bright green whenever the microphone is present and on.
If a gooseneck microphone is not present, the GN MIC key will not be lit.
5.2.1 Switching from the gooseneck microphone to the headset
The gooseneck microphone is your panel’s default microphone unless a headset is
connected.
When a headset is connected, an auto-sensing circuit in the panel automatically turns the
headset microphone on and turns the gooseneck microphone off. The headset
microphone always takes precedence over the gooseneck microphone.
5.3 Turning the headset microphone on and off
The headset microphone key (HS MIC) turns your panel’s headset microphone on and off.
Press once to turn the microphone on. Press again to turn the microphone off.
The HS MIC key is lit:
•
Dim green whenever a headset microphone is present but off.
•
Bright green whenever a headset microphone is present and on.
When a headset microphone is not present, the key will not illuminate.
5.3.1 Switching from the headset to the gooseneck microphone
When a headset is connected to the panel, the headset microphone automatically
becomes active and the gooseneck microphone is switched off. To switch to the
gooseneck microphone, press the gooseneck microphone key (GN MIC). When the
headset is disconnected, the gooseneck microphone automatically becomes active.
31 I-Series Panels User Guide