Clear-Com i-Series Panels - Manual (Page 37)

6.1.1 Advance features accessed by the numeric keypad (summary)
Key Feature Description
1 Dial Activates telephone dialing mode
2 Local Exclusive Mode temporarily deactivates all keys except for the one
that is currently being used.
3 Local Page Override Mode overrides current on/off and volume settings at a
destination.
4 IFB, Partyline and
Fixed Group
Assignments Mode enables sources to be assigned to IFBs, partylines
and Fixed groups.
5 Local Key
Assignments Mode enables the assignment of sources and destinations
to keys on your user panel.
6 Swap Page Enables you to switch between the main page and the swap
page on the user panel.
7 Local Preferences Enables you to adjust Listen Level Reset, Panel Mic
Level, Headset Mic Level, Sidetone Level and Listen
Level Adjust.
9 Port Information Comprises the panel’s port number, label, associated CPU
card (on the matrix), and current firmware version number.
0 CLR Clear Clears the current display entry and takes you back to the
previous menu.
*RED Escape or Cancel Abandons all unsaved programming and returns the panel
to normal use.
#GRN Enter Saves the current programming changes and reverts the
panel to normal use.
VOL/PROG Display Contrast
Adjust
Baud Rate Adjust
Allows you to adjust contrast lighting on displays and to
adjust the panel’s baud rate.
Table 7: Advanced features, accessed by the numeric key pad (Summary)
6.2 Telephone dialing from the keypad (#1 key)
You can dial from the keypad on a function key module as if you were dialing from a
standard telephone keypad.
When you press the number keys, standard DTMF tones are generated to all active talk
key destinations. Note that this feature is only available when the central matrix is
connected and online.
37 I-Series Panels User Guide