Clear-Com i-Series Panels - Manual (Page 38)

To generate standard DTMF tones to all active talk key destinations:
1. Enter dialing mode by pressing the 1 key on the keypad. The keypad becomes a
telephone touch-tone dialing pad.
Note:
The word Dial appears in the display below the Clear (CLEAR) key.
2. All 12 valid dialing keys on the keypad are lit dim red . Press keys on the numeric
keypad (0–9, *, #) to generate standard DTMF tones to all active talk-key
destinations.
3. To exit dialing mode, press the CLEAR key.
Tip: Dialing mode automatically times out if you do not press a key on the numeric
keypad (0–9, *, #) for five seconds.
6.3 Accessing Local Exclusive (#2 key)
In Local Exclusive mode, all previously latched keys on your panel deactivate temporarily
while you talk exclusively to one destination or listen to one source.
Note:
Local Exclusive is only available when the Eclipse / Eclipse HX matrix is connected and
online.
To use Local Exclusive mode:
1. Enter Local Exclusive mode by pressing the 2 key on the keypad.
2. Press and release any talk or listen key (even an already latched key).
When you press and release a talk or listen key, all previously latched keys (both
talks and listens) deactivate temporarily, and you can talk or listen from that key
exclusively.
Note:
The feature is only active while the key is latched in Local Exclusive mode. The 2
key on the keypad is lit
bright green while this feature is active.
3. To exit Local Exclusive mode, press the key you pressed in step 2 again to
deactivate it.
The previously latched keys return to their active state.
Note:
The Local Exclusive feature does not work with the answer-back (ANSWR) key.
6.4 Local Page Override (#3 key)
Local Page Override you to talk to one or more destination panels regardless of the on/off
or volume settings at each panel’s speaker. The feature overrides the current on/off and
volume settings at the destination.
Tip: You can adjust the local page override’s volume level in ECS / EHX. By default, the
volume is set up at 5 on a 1–10 scale, but it can be adjusted to any value on the scale.
38 I-Series Panels User Guide