Clear-Com i-Series Panels - Manual (Page 27)

5. When the required volume has been reached, press and release the VOL/PROG
control to accept the setting.
6. Press and release the listen key. The source’s volume (listen level) is now set at
the required level.
Note:
If you try to push an active listen path higher than the maximum possible volume, you will
drive the volume of all other active paths downward, putting more emphasis on the desired
path.
4.6.3.2 Method 2
The listen levels may also be adjusted using the Local Preferences menu (requires a 16-
button key module).This method only works with a 16-button function key module.
To adjust the listen levels, using the Local Preferences menu:
1. To display a list of menu items, press the Enter key (labeled #GRN) on the
numeric keypad.
2. The top two menu options are displayed in the panel’s leftmost display. Scroll to
Local Preferences, using the VOL/PROG control.
To select Local Preferences, press the VOL/PROG control or press 7 on the
numeric keypad.
Tip: You can also scroll through the menu items one at a time by pressing the
CLEAR key to scroll up the menu and the ANSWR key to scroll down the menu.
3. In Local Preferences, scroll to Listen Level Adjust.
To select Listen Level Adjust, press the VOL/PROG control or press 5 on the
numeric keypad.
Listen Level is displayed in the panel’s leftmost display, indicating that you are in
listen-level-adjust mode.
Tip: To quickly enter Listen Level Adjust mode, simply press three keys in quick
succession: the Enter key (labeled #GRN), followed by the 7 key, followed by the 5
key.
4. Tap any listen key or talk-with-listen key to select it. The key is lit bright green .
5. Rotate the VOL/PROG knob clockwise to increase the source’s volume or
counterclockwise to decrease the source’s volume.
6. Continue adjusting listen levels by first tapping a key to select it, and then rotating
the VOL/PROG knob to adjust the source’s volume.
7. To exit Listen Level Adjust mode, press the Escape key (labeled *RED).
Tip: You can also exit listen-level-adjust mode by not pressing a key on the
numeric keypad (0–9, *, #) for five seconds. After five seconds the mode times out.
27 I-Series Panels User Guide