Clear-Com i-Series Panels - Manual (Page 44)

6.8.1 Adjusting volume settings in Local Preferences
To adjust a volume setting in Local Preferences:
1. Press the 7 key on the numeric keypad. The following options are displayed in the
leftmost display of the panel:
• Listen Level Reset.
• Gooseneck Mic Volume Level Reset.
• HS Mic Volume Level Reset.
• Sidetone volume level reset.
• Exit.
2. Scroll through the list by:
• Turning the VOL/PROG control.
• Using the CLEAR key to scroll up the list and the ANSWR key to scroll
down the list.
3. When the desired item appears in the display above the ANSWR key, select it by
either:
• Pressing the VOL/PROG control.
• Pressing the ENTER key (#GRN).
4. Follow the directions given in the display. Go to the setting you are adjusting.
5. To exit “local preferences” mode, press the ESCAPE key (labeled “*RED”) on the
function keypad module. To return to the previous menu without saving any
changes, press the “0” key (labeled “CLR”). You can also select “exit” from the
local preferences menu to exit “local preferences” mode.
6.8.1.1 LOCAL PREFERENCE OPTIONS
Listen Level Reset
When you select Listen Level Reset, all listen keys are reset to the default level which is
the highest possible volume. The leftmost display on the panel will read: “Listen Level
Reset Sent to Matrix” for one second.
Gooseneck Microphone Volume Level
When you select this menu item, the leftmost display on the panel shows the current
gooseneck microphone volume level, with choices for increasing or decreasing it. For
example, the display may read:
Set Gooseneck Mic Volume Level
+2 dB with increase/decrease choices of:
(+7,+6,+5,+4,+3,+2,+1,0-1,-2,-3,-4,-5,-6,-7,-8)
In this example, the current gooseneck volume level is 2 dB. To increase the volume,
press the ANSWR key. To decrease the volume, press the CLEAR key. Each time you
press either the ANSWR key or the CLEAR key, you change the volume level by one
44 I-Series Panels User Guide