Clear-Com i-Series Panels - Manual (Page 40)

6.5.2 Setting up partyline members
Note:
Only talk and listen keys can be members of a partyline.
To set up partyline members on an I-Series panel:
1. Press the 4 key. The CLEAR key is lit bright red and IFB is displayed below it.
2. To access partyline mode press the CLEAR key. PL is displayed below the key.
3. All available partylines flash red . Press the key for the desired partyline.
The key is lit
bright red and all available members flash green .
4. Add a member to the partyline by pressing a flashing green key.
The key is lit bright green to indicate the member has been added to the partyline.
5. To remove a member from the partyline, press that member’s key (lit bright
green ).
The key blinks green to indicate it is now available.
6. Repeat steps 6 and 7 until the Partyline contains all desired members.
7. To exit partlyline mode, press the CLEAR key twice.
6.5.3 Setting up Fixed Group members
Note:
Only talk and listen keys can be members of a Fixed Group.
To set up Fixed Group members on an I-Series panel:
1. Press the 4 key. The CLEAR key is lit bright red and IFB is displayed below it.
2. Press the CLEAR key. PL is displayed below the key.
3. To access Fixed Group mode, press the CLEAR key again. FG is now displayed
below the key.
4. All available Fixed Groups flash red . Press the key for the desired Fixed Group.
The key is lit bright red and available members flash green .
5. Add a member to the Fixed Group by pressing a flashing green key.
The light is lit bright green to indicate the member has been added to the Fixed
Group.
6. To remove a member from the Fixed Group, press the key for that member (lit
bright green ).
The key blinks green to indicate it is now available.
7. Repeat steps 7 and 8 until the Fixed Group contains all desired members.
8. Press the CLEAR key to exit Fixed Group mode.
40 I-Series Panels User Guide