Burkert Type 8076 - Manual (Page 68)

66
Sparepartsandaccessories
11. spAre pArTs AnD Accessories
attention
risk of injury and/or damage caused by the use of unsuitable parts.
Incorrect accessories and unsuitable replacement parts may cause injuries and damage the device and the
surrounding area.
• Use only original accessories and original replacement parts from Bürkert.
spare part (only for flowmeters type 8026) order code
Set with 1 green FKM seal + 1 black EPDM seal 552111
Snap ring 619205
Nut 619204
Accessory order code
Display module 559168
Black blank cover with EPDM seal 560948
Black blank cover with EPDM seal 561843
Transparent cover with EPDM seal 560948
5-pin female M12 female connector, moulded on shielded cable (2 m) 438680
5-pin male M12 connector, to be wired 560946
5-pin male M12 connector, moulded on shielded cable (2 m) 559177
12. pAcKAGinG, TrAnsporT
note
Damage due to transport
Transport may damage an insufficiently protected device.
• Transport the device in shock-resistant packaging and away from humidity and dirt.
• Do not expose the device to temperatures that may exceed the admissible storage temperature range.
• Protect the electrical interfaces using protective plugs.
13. sTorAGe
note
poor storage can damage the device.
• Store the device in a dry place away from dust.
• Storing temperature for type 8026: -10 to +60°C.
• Storing temperature for type SE36: -10 to +60°C.
• Storing temperature for the fitting: refer to the related manual
English
Type 8026- 8036- 8076