Burkert Type 8076 User Manual
Operating instructions
Table of contents
Document Outline
- Cover
- Table of contents
- 1. About this manual
- 2. Intended use
- 3. Basic safety information
- 4. General information
- 5. Description
- 6. Technical data
- 7. Assembly
- 8. Installation and wiring
- 8.1. Safety instructions
- 8.2. Installation onto the pipe
- 8.3. Wiring
- 8.3.1. Electrical connections
- 8.3.2. Assembling the male or female connector (accessories:
- 8.3.3. Equipotentiality of the installation
- 8.3.4. Wiring a version with a single M12 fixed connector and an NPN transistor output and a current output
- 8.3.5. Wiring a version with a single M12 fixed connector and two transistor outputs and one current output
- 8.3.6. Wiring a version with two M12 fixed connectors and two transistor outputs and two current outputs
- 9. Adjustment and commissioning
- 9.1. Safety instructions
- 9.2. When switching on the device
- 9.3. Operating levels
- 9.4. Using the navigation button
- 9.5. Using the dynamic functions
- 9.6. Example for the input of a numerical value
- 9.7. Example for browsing in a menu
- 9.8. Description of icons and LEDs
- 9.9. Process level
- 9.10. Accessing the Configuration level
- 9.11. Structure of the Configuration menus
- 9.12. Parameters Menu
- 9.12.1. Transferring data from one device to another
- 9.12.2. Modifying the PARAM menu access code
- 9.12.3. Restoring the default parameters of the Process level and the outputs
- 9.12.4. Setting the data displayed on lines 1 and 2 of the display module
- 9.12.5. Choosing the units for the totalizers displayed in Process level
- 9.12.6. Displaying the lowest and highest values measured
- 9.12.7. Setting the parameters for the reading comfort level of the data displayed
- 9.12.8. Defining the connection mode of the outputs
- 9.12.9. Setting the parameters of the current outputs
- 9.12.10. Setting the parameters of the transistor outputs
- 9.13. Calibration menu
- 9.14. Diagnostic menu
- 9.15. Test menu
- 9.16. Information Menu
- 10. Maintenance and troubleshooting
- 11. Spare parts and accessories
- 12. Packaging, Transport
- 13. Storage
- 14. Disposal of the product