Burkert Type 8076 - Manual (Page 24)

22
Assembly
7.3. mounting the cover
→
Check that there is a seal on the cover and that it is not
damaged. Replace it if necessary.
→
Grease the seal if necessary, using a component compatible
with the seal material.
→
Fully tighten by hand to guarantee tightness.
Figure 8 : Fitting the cover
7.4. mounting the display module
20°
→
Unscrew the cover (see chapter 7.2).
→
Set the display module at an angle of ca. 20° in relation to the
desired position.
a)
b)
c)
d)
→
The module can be mounted in 4 different positions, at 90°
intervals.
→
Fully push in the module and turn to the right to lock it.
Figure 9 : Mounting the display module
English
Type 8026- 8036- 8076