Burkert Type 8076 - Manual (Page 38)

36
Adjustmentandcommissioning
9.3. operating levels
The device has 2 operating levels:
process level
This level is used:
• to read the value of the measured flow rate and/or the sensor input frequency
• to read the values of both volume totalizers
• to reset totalizer 2
• to read both the lowest and highest values of the flow rate or the input frequency that have been measured by
the device since the latest reset (this feature is not active by default),
• to reset both the lowest and highest values of the flow rate or the input frequency, if the feature has been
activated
• to read the current values emitted on the 4-20 mA outputs.
configuration level
This level comprises 5 menus:
Menu title Relevant icon
"Param": see chap. 9.12
This is
when the
device is be-
ing parame-
tered............
....................
"Calib": see chap. 9.13
"Diagnostic": see chap. 9.14
"Test": see chap. 9.15
"Info": see chap. 9.16
English
Type 8026- 8036- 8076