Burkert Type 1150 - Manual (Page 8)

6 - 1150
G
ENERAL
N
OTES
Typographical conventions
Please observe the notes in these operating instructions together with the conditions of use and permitted
data that are specified in the data sheets for the Process and Program Controller and for the respective
pneumatically operated valve, in order that the device will function perfectly and remain operable for a long
time:
• Keep to standard engineering rules in planning the use of and operating the device!
• Installation and maintenance work are only allowed by specialist personnel using suitable tools!
• Observe the current regulations on accident prevention and safety for electrical devices during
operation and maintenance of the device!
• Switch off the supply voltage in all cases before intervening in the system!
• Take suitable precautions to prevent inadvertent operation or damage by unauthorized action!
• Make sure that after an interruption to the electrical or pneumatic supply, the process is configured to
resume in a well-defined, controlled manner!
Safety instructions
NOTE Indicates important additional information, tips and recommendations.
Indicates procedure(s) that you must carry out.
CAUTION! This device is sensitive to electrostatic discharge (ESD). Contact with an electrically
charged personnel or object will damage this device. In the worst case, immediate damage
or failure on commissioning will occur.
Symbols
Representation
Menu items
Texts relating to screen representations are shown in italics (e.g. Exit program).
Factory Preset Parameters
Factory presets or setting at delivery (E.g.: 0 ... 9999, where 9999 is the factory setting at delivery).
ATTENTION!
Indicates information, where failure to observe, your safety or the proper function of the
device will be compromised.