Burkert Type 1150 - Manual (Page 60)

58 - 1150
C
ONFIGURATION
Controller 1 (2 to 4) / Inputs
Value / selection Description
Process value
(Analog selector)
Analog inp. 1
Defines the source for the process value of the control channel.
External setpoint
(Analog selector)
Switched off Activates the external setpoint input and defines the source for the external
setpoint.
Program setpoint
(Analog selector)
Setpt.1 PROF1 Assigns one of the four available profile traces to the controller channel.
"No funct." means that the controller channel responds as for fixed-setpoint
control.
Controller 1 (2 to 4) / Inputs
Value / selcetion Description
Manual output
(Analog selector)
Switched off The manual output is defined through an analog signal, instead of via the keys or
the interfaces.
Output feedback
(Analog selector)
Switched off Defines the source for output feedback.
Output feedback must be configured in the case of a proportional controller with
integral actuator driver.
Additive disturbance
(Analog selector)
Switched off Defines the source for the additive disturbance.
Multiplicative disturbance
(Analog selector)
Switched off Defines the source for the multiplicative disturbance.