Burkert Type 8695 - Manual (Page 54)

54
DeviceNetinstallation
noTe!
Breakage of the pneumatic connection pieces due to rotational impact.
▶ When unscrewing and screwing in the transparent cap, do not hold the actuator of the process valve but the
connection housing.
Damage or malfunction due to penetration of dirt and humidity.
▶ To observe degree of protection IP65 / IP67, screw the transparent cap in all the way.
→
Close the device (assembly tool: 674078 9) ).
Body casing
Connection housing
Actuator
Transparent cap
Figure 44: Control head
When the teach function is activated the actuator cannot be actuated via the DeviceNet communication.
9)
The assembly tool (674078) is available from your Bürkert sales office.
english
Type 8695