Datamax-O'Neil Performance series User Guide - Manual (Page 94)

4 | Menu System
Performance Series User’s Guide 116
To find the IP address, select Info > Network Report and record the value for Ethernet
IP.
Note: The following Web browsers are supported:
• Internet Explorer (version 8 and higher)
• Firefox (version 13 and higher)
• Google Chrome (version 23 and higher)
Host Timeout
The Host Timeout refers to the print job timeout in seconds before moving on to
monitor other ports.
Table 16: Host Timeout
Reset Defaults
The Reset Defaults function allows the user to reset the communications to the
default settings.
To reset the communication settings to the factory default settings, select one of the
options and select the green Accept button to make the change.
• Ethernet
• Wireless
• Serial
Adjustments
Adjustments are considered fine adjustments and should not be considered main
settings. Select from the following settings to change the values:
Table 17: Adjustment Settings
Function Range Default
Host Timeout 1 to 300 seconds 1
Port Number 0 -65535 9100
Host Name Any String Printer model number followed
by the last 6 digits of the MAC
address. Ex: p1115_208CB7
Hex Transfer True/False False
Adjustment Settings Ranges Default
Darkness -20 to 20 0
Contrast -10 to 10 0
Vertical Adjust -100 to 100 0
Horizontal Adjust -100 to 100 0