Datamax-O'Neil Performance series User Guide - Manual (Page 83)

Menu System | 4
105 Performance Series User’s Guide
Note: The default settings will be used if the print job does not directly specify the
settings.
Note: Most of these settings will affect the internal Quality Label from the Test menu.
Note: Rotating oversized images with Print Truncation enabled may result in truncating
the printout entirely.
Note: Setting the raster mode to transparent will allow for texts, barcodes and images
that support transparency to be copied onto the destination without the white regions
generally associated with images. Setting the raster mode to opaque allows for texts,
barcodes and images to be applied onto the destination with the white pixels from the
source. Generally, this is only notices when text, barcodes or images are placed on top
of each other.
Note: Print on Gap when enabled in Continuous paper mode eliminates simulated gap
between labels. In this mode, vertical adjustment can be used to control the skip space
size for different TOF types.
Note: Print Truncation takes precedence over Print on Gap.
Orientation Portrait
Landscape
Reverse Portrait
Reverse Landscape
Portrait
Raster Mode Transparent
Opaque
Opaque
Default Font Number (Please see Appendix A
for the appropriate values) 0 to 52 23 (Courier)
Default Symbol Set (Please see Appendix A
for the appropriate values) [0] PC-8
Default Point Size 4.00 to 999.75 12.00
Default Pitch Size .44 to 99.99 10.00
Print Truncation Enabled
Disabled
Enabled
Print on Gap Enabled
Disabled
Disabled
Settings Values Ranges Default