Datamax-O'Neil Performance series User Guide - Manual (Page 136)

8 | Terms and Definitions
Performance Series User’s Guide 164
Tools
Tools > Calibrate
Tools > Maintenance
Tools > Maintenance > Upgrade
Vertical Adjust User-entered value allowing for the vertical adjustment of the
start of the image relative to the horizontal leading label edge
due to mechanical variations.
Horizontal Adjust User-entered value allowing for the horizontal adjustment of the
image relative to the printhead center.
Head Pressure Adjust User-entered value allowing for the adjustment of the pressure
the head exerts on the media.
Rewinder Tension Adjust User-entered value providing for the adjustment of the rewinder
motor.
Ribbon Tension Front Adjust User-entered value providing for the adjustment of the front
ribbon motor.
Ribbon Tension Rear Adjust User-entered value providing for the adjustment of the rear
ribbon motor.
Darkness User-entered value allowing for the fine adjustment of the
darkness of the printed image due to printhead and printer
thermal variations.
Contrast User-entered value allowing for the fine adjustment of the
leading edges of the printed images to improve print quality and
barcode readability.
Terms Definitions
Calibrate Paper The automatic scanning of the paper to determine top-of-form
media and top-of-form gap settings.
Calibrate Sensors The automatic calculation of the best setting for the autoload
sensor and the top-of-form sensor when no paper is present.
Calibrate Display The calibration utility for the touch position on the display.
Calibrate Manually Allows manual calibration for paper/mark/gap values.
Terms Definitions
Upgrade The utility for upgrading the printer software, firmware, ribbon
controller and bootloader.
Terms Definitions