Datamax-O'Neil Performance series User Guide - Manual (Page 81)

Menu System | 4
103 Performance Series User’s Guide
2. Upon exiting the Print Adjust panel, either select the green Accept button or the red
Reject button.
b. Contrast
The contrast adjustment is set within the range of -10 to +10. To increase contrast, adjust
the settings in a positive (+) direction.
1. Enter the appropriate value in the field.
2. Upon exiting the Print Adjust panel, either select the green Accept button or the red
Reject Button.
c. Vertical Adjust
The vertical adjustment is set within the range of -100 to +100 dots. To move the image
down, adjust the settings in a positive (+) direction.
1. Enter the appropriate value in the field.
2. Upon exiting the Print Adjust panel, either select the green Accept button or the red
Reject button.
d. Horizontal Adjust
The horizontal adjustment is set within the range of -100 to +100 dots. To move the
image to the right, adjust the settings in a positive (+) direction.
1. Enter the appropriate value in the field.
2. Upon exiting the Print Adjust panel, either select the green Accept button or the red
Reject button.
2. User
The user button allows for the usage of custom labels and custom printer configurations
that are saved internally or saved to a memory stick inserted in the USB host.
User Labels
Custom user labels that have been saved internally or in a mass storage device may be
printed.
1. Select User Labels.
2. Select the file to be printed (internally or USB hosted).
3. Select the green Accept button.
4. Select the Print button to print the label.