Datamax-O'Neil Performance series User Guide User Manual
Page 91

Menu System | 4
113
Performance Series User’s Guide
Note:
*These values may vary depending on the printer model.
Communications
Select Communications to change the communications settings.
a. Ethernet
The following Ethernet communications settings may be adjusted:
Table 12: Ethernet Communications Settings
Once the data has been entered, select the Home button and then select the green
Accept button to save the changes which will require a printer reboot.
If necessary, the user may return to the default settings by selecting General > Reset
Defaults > Ethernet.
b. Wireless
The following wireless settings may be set for printers with the wireless option installed:
Table 13: Wireless Settings
Ribbon Low Diameter
1.0 to 2.0 in.
1.5 in.
Functions
Values
Actions
Default
DHCP
Enabled
Disabled
Enabled
IP Address
If DHCP is disabled, enter the
appropriate value
0.0.0.0
Subnet Mask
If DHCP is disabled, enter the
appropriate value
0.0.0.0
Gateway
If DHCP is disabled, enter the
appropriate value
0.0.0.0
Functions
Values
Actions
Default
Wireless Enable
Enabled
Disabled
Enabled
SSID
Enter the appropriate SSID value
0.0.0.0
Wireless DHCP
Enabled
Disabled
Enabled
IP Address
Enter the appropriate value
0.0.0.0
Subnet Mask
Enter the appropriate value
0.0.0.0
Media Settings
Values
Ranges
Default