B&K Precision 5492BGPIB - Manual - Manual (Page 93)

SCPI Command Reference
93
:BEEPer Command
[:STATe]
Command Syntax:
:SYSTem:BEEPer[:STATe]
Command Parameter:
= 1 or ON Enable beeper
0 or OFF Disable beeper
Query:
[:STATe]? Query state of beeper
Return String:
1 or 0
Description:
This command is used to enable or disable the beeper for limit tests.
:LOCal
Command syntax:
:SYSTem:LOCal
Description:
This command is used to take instrument out of the remote state and enable front panel operation.