B&K Precision 5492BGPIB - Manual - Manual (Page 80)

SCPI Command Reference
80
Table 6-4 SENSe Command Summary (cont.)
Command Function Description Default
:CURRent:DC
:NPLCycles
:NPLCycles?
:RANGe
[:UPPer]
[:UPPer]?
:AUTO
:AUTO?
:REFerence
:STATe
:STATe?
:ACQuire
:REFerence?
:AVERage
:TCONtrol
:TCONtrol?
:COUNt
:COUNt?
:STATe
:STATe?
Path to configure DC current
Set integration rate(line cycles; 0.1 to 10)
Query line cycle integration rate
Path to configure measurement range
Select range (0 to 10)
Query range
Enable or disable auto range
Query auto range
Specify reference (-10 to 10)
Enable or disable reference
Query state of reference
Use input signal as reference
Query reference value
Path to configure and control the filter
Select filter type (MOVing or REPeat)
Query filter type
Specify filter count (1 to 100)
Query filter count
Enable or disable filter
Query state of digital filter
1
10
ON
0
OFF
5
OFF
:VOLTage:AC
:NPLCycles
:NPLCycles?
:RANGe
[:UPPer]
[:UPPer]?
:AUTO
:AUTO?
:REFerence
:STATe
:STATe?
:ACQuire
:REFerence?
:AVERage
:TCONtrol
:TCONtrol?
:COUNt
:COUNt?
:STATe
:STATe?
Path to configure AC voltage
Set integration rate (line cycles; 0.1 to 10)
Query line cycle integration rate
Path to set measurement range
Select range
Query range
Enable or disable auto range
Query auto range
specify reference (-757.5 to 757.5)
Enable or disable reference
Query state of reference
Use input signal as reference
Query reference value
Path to configure and control the filter
Select filter type: MOVing or REPeat
Query filter type
Specify filter count (1 to 100)
Query filter count
Enable or disable filter
Query state of digital filter
1
750
ON
0
OFF
5
OFF