B&K Precision 4045B - Manual - Manual (Page 94)

94
SWRAte
This command sets the time for one complete sweep:
Arguments
Type: Numeric
Units: S, mS, uS, nS
Range: 10mS to 100S
Command Type: Setting or Query
Setting
Syntax: SWRAte[units]
SWRAteMINimum|MAXimum
Examples: SWRAte 50MS
Query
Syntax: SWRAte?[MINimum|MAXimum]
Response: NR3
SWSTArt
This command sets the start frequency of the sweep:
Arguments
Type: Numeric.
Units: MHz, KHz, Hz (default)
Range: Dependent on the frequency range of the
current function.
Command Type: Setting or Query
Setting
Syntax: SWSTArt[units]
SWSTArtMINimum|MAXimum
Examples: SWSTArt 5KHZ