B&K Precision 4045B - Manual - Manual (Page 31)

31
Trigger Menu
F1: Manual – Selects manual as the trigger source.
To trigger the waveform generator,
press this MANUAL trigger button again.
F2: Internal – Selects the internal trigger generator
as the trigger source. Change the
internal trigger rate displayed with the rotary input
knob.
F3: External – Selects the external trigger signal as
the trigger source. The trigger source
is supplied through the TRIG IN connector.
In BURST MODE, the F4 key displays N-Burst,
representing the number of burst cycles to output
with each trigger. The N value can be changed from
2 to 65,535.