B&K Precision 4045B - Manual - Manual (Page 56)

56
memory, follow these steps:
1. Press ARB main key to display the
selection menu.
2. Press F4 :ARB to display the arbitrary
menu.
3. Press F3:EDIT to display the Edit menu.
4. Press F1:POINT, to select the point by
point programming mode.
5. Press F1:ADDRESS
6. Use the rotary knob or the numerical keys
to enter the address.
7. Press F2:DATA.
8. Use the rotary knob r the numerical keys to
enter the value for the data point. Valid
entries range from –2047 to 2047.
9. Repeat steps 5 through 9 until you finish
programming your arbitrary waveform.
NOTE
Each time you press ENTER to complete a data
point entry in numerical mode, the
auto-increment address advances by one.
3.13.7 Setting the Arbitrary Frequency
The arbitrary waveform frequency is a function of the
number of data points used to run the waveform (the
length parameter in the ARBITRARY menu) and the
waveform execution point rate. The waveform