B&K Precision 4045B - Manual User Manual

Page 103

103

Considerations:

1) The value of the data at the start and end points

must first be set by the user, using the

:ARB:DATA command.

2) The range of the straight line cannot overlap with

protected memory.

3) The end address must be greater than the start

address.

Predefined waveforms

:ARB:PRED ,,,

This command is used to load the waveform memory

with a specific type of waveform.

Arguments

Shape

Type: Character

Options: SINusoid

SQUare

TRIangle

NOISe (Pseudo-Random Noise)

ANOise (Noise added to the current

waveform)

Start Address

Type:

Numeric. The MIN and MAX forms both

set the address to 1

Range:

1 to 1000

Rounding: to integer value

Length

Type: Numeric.