B&K Precision 4045B - Manual - Manual (Page 89)

89
DCYCle
This command is used to set the duty-cycle of the square
wave or the symmetry of triangular wave. The value is
given in percent .
Arguments Type: Numeric
Units: None (percent implied)
Range: 1 to 99
Rounding: To integer
Command Type: Setting or Query
Syntax: DCYCle
DCYCle MINimum|MAXimum
Query Syntax: DCYCle?[MINimum|MAXimum]
Response: NR3
OUT
This command controls whether the output is ON or OFF.
Arguments
Type: Boolean
Command Type: Setting or Query
Setting
Syntax: OUTON|1|OFF|0
Examples: OUT ON
OUT 1
Query
Syntax: OUT?
Response: 0|1