Programming, 7 on key, 8 cursor keys – B&K Precision 4045B - Manual User Manual
Page 10: 9 rotary input knob, 10 power-on settings, 12 displaying errors, 13 quick start, 1 overview, 2 device states, 3 message exchange protocol
10
3.6.4 SWEEP Key ................................. 34
3.6.5 MODULATION Key ...................... 36
3.7 ON Key .................................................48
3.8 Cursor Keys ..........................................49
3.9 Rotary Input Knob .................................49
3.10 Power-On Settings ..............................49
3.11 Memory ...............................................50
3.12 Displaying Errors ................................51
3.13 Quick Start ..........................................52
3.13.1 Selecting a Standard Waveform
................................................................ 52
3.13.2 Setting the Output ................... 52
3.13.3 Using Voltage Offset ............... 53
3.13.4 Storing and Recalling a
Waveform Generator Setup .................. 53
PROGRAMMING ................... 60
4.1 Overview ..............................................60
4.1.1 Connecting to USB (Virtual COM)
Interface.................................................. 60
4.1.2 USB (Virtual COM) Settings ....... 66
4.2 Device States .......................................67
4.2.1 Local State (LOCS) ..................... 67
4.2.2 Remote State (REMS) ................. 67