B&K Precision 4045B - Manual - Manual (Page 77)

77
-178 Expression data not allowed
Execution Errors
An execution error indicates that the device could not
execute a syntactically correct command, either since the
data were out of the instrument's range, or due to a device
condition.
-200 Execution error
An attempt was made to RECALL the
contents of an uninitialized stored
setting buffer.
-211 Trigger ignored.
The *TRG common command was
ignored due to the device not being in
the correct state to execute the
trigger.
-220 Parameter error.
A parameter is in the correct range,
but conflicts with other parameters.
-221 Settings conflict.
The parameter is out of range due to
the current instrument state.
-222 Data out of range.
-223 Too much data.
The arbitrary waveform memory limit
has been exceeded.
-224 Illegal parameter value.