B&K Precision 4045B - Manual - Manual (Page 106)

106
This command sets the length of the waveform being
run.
Arguments
Type: Numeric
Range: 2 to 1000
Rounding: to integer value
Command Type: Setting or Query
Setting
Syntax: :ARBitrary:LENGth
:ARBitrary:LENGthMINimum|MAXimum
Example: :ARB:LENG 1E3
Query
Syntax:
:ARBitrary:LENGth?[MINimum|MAXimum]
Example: :ARB:LENG?
Response: NR1
Considerations: 1) Changing the wavelength will
change either the frequency.
2) The minimum wavelength is 2.
Save
:ARBitrary:SAVe
This command is used to save all unsaved arbitrary
waveform data into non-volatile memory..
Arguments
Type: none
Command Type: Setting only
Setting
Syntax: :ARBitrary: SAVe