B&K Precision 4045B - Manual - Manual (Page 52)

52
3.13 Quick Start
This section explains how to generate various
waveforms and modify the output waveform.
* Generating a waveform output
* Modifying waveform output
* Storing and recalling a waveform generator
setup
3.13.1 Selecting a Standard Waveform
You can select several standard waveforms as: sine,
triangle, square. Creating a standard waveform
requires selecting the waveform type, parameters
and their settings that define the waveform.
Generating a standard waveform requires the
following:
* Selecting the waveform
* Setting the output frequency
* Setting the output amplitude and offset
3.13.2 Setting the Output
To set the output channel, press the Output ON key.
The key will lit indicating the output is enabled.