B&K Precision 4045B - Manual - Manual (Page 51)

51
3.12 Displaying Errors
The waveform generator displays error messages
when front-panel settings are either invalid or may
produce unexpected results.
Table 2 – Error Messages
Message
Text
Description
Out of range The set value is out of the
instrument’s limits.
Setting
conflict
Settings conflict with another
parameter setting or value.
Empty
location
Attempt to recall settings from an
empty storage location.
Trig rate
short
Internal trigger rate is too short to
output waveform or burst.
Save RAM New firmware installed.
Must divide
by 4
Predefined wave length must be
divisible by 4.
Must divide
by 2
Predefined wave length must be
divisible by 2.