Atec Rohde-Schwarz-CMW500 - Manual (Page 69)

Version 11.00, May 2013
Rohde & Schwarz R&S ® CMW500 Wideband Radio Communication Tester 69
Mechanical resistance non-operating mode
Vibration sinusoidal in line with EN 60068-2-6,
5 Hz to 150 Hz, 0.15 mm amplitude const.,
55 Hz to 150 Hz, 0.5 g const.
Vibration random in line with EN 60068-2-64,
10 Hz to 300 Hz, acceleration 1.2 g RMS
Shock in line with MIL-STD-810E, method 516.4,
procedure I, 40 g shock spectrum
Power rating
Rated voltage 100 V to 240 V AC (± 10 %)
Rated frequency 50 Hz to 60 Hz (± 5 %)
Rated power max. 850 VA
standby max. 13 W
Power consumption R&S ® CMW500 and R&S ® CMW270
single tester, non-signaling
approx. 200 W
R&S ® CMW280 single tester, non-signaling approx. 180 W
Display selected with R&S ® CMW-S600B or
R&S ® CMW-S600D or R&S ® CMW-S600F
configuration
(front panel with display and keypad)
Size 21 cm TFT color display (8.4")
Resolution 800 × 600 pixel (SVGA resolution)
Pixel failure rate < 1.1 × 10 –5
Dimensions of the R&S ® CMW500 or
R&S ® CMW270
W × H × D, overall 465.1 mm × 197.3 mm × 517.0 mm
(18.31 in × 7.77 in × 20.35 in)
for rackmounting 19" 1/1, 4 HU, 450
Dimensions of the R&S ® CMW280 W × H × D, overall 465.1 mm × 197.3 mm × 417.0 mm
(18.31 in × 7.77 in × 16.41 in)
for rackmounting 19" 1/1, 4 HU, 350
Weight of the R&S ® CMW500 or
R&S ® CMW270
single tester, non-signaling approx. 14 kg
(approx. 31 lb)
with typical options approx. 18 kg
(approx. 40 lb)
Weight of the R&S ® CMW280 single tester, non-signaling approx. 12 kg
(approx. 27 lb)
with typical options approx. 14 kg
(approx. 31 lb)
Calibration interval 12 months recommended for highest accuracy,
see specified RF generator and
RF analyzer level uncertainty
24 months add 0.2 dB to specified RF generator and
RF analyzer level uncertainty