Atec Rohde-Schwarz-CMW500 - Manual (Page 32)

Version 11.00, May 2013
32 Rohde & Schwarz R&S ® CMW500 Wideband Radio Communication Tester
LTE FDD signaling (prerequisite: R&S ® CMW-KS500,
R&S
®
CMW-B300A/R&S
®
CMW-B300B options)
17
Standard 3GPP E-UTRA FDD
Channels
Physical channels and signals DL RS (cell-specific RS), PSS, SSS, PBCH,
PCFICH, PHICH, PDCCH, PDSCH
UL RS (demodulation RS), PRACH, PUCCH,
PUSCH
Bandwidth 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz,
20 MHz
Modulation schemes DL PDSCH QPSK, 16QAM, 64QAM
UL PUSCH QPSK, 16QAM
Reference measurement channels RMCs in line with 3GPP TS 36.521
Annex A.2 (UL) and Annex A.3 (DL) RMCs for FDD,
full and partial RB allocation,
modulation: QPSK, 16QAM,
64QAM (DL only)
Frequency range
Bands 1 to 22 and bands 24 to 25 with the R&S ® CMW-KS500 option
DL see LTE FDD RF generator specifications
UL see LTE FDD RF analyzer specifications
Frequency setting channel number
DL signal
Output level range due to PAR 15 dB below max. output level of
RF generator,
see general technical specifications
Output level uncertainty see general technical specifications
Output level resolution 0.1 dB
Output level setting in line with 3GPP TS 36.521 Annex C.0 RS energy per resource element (EPRE)
[dBm/15 kHz]
Channel levels PSS, SSS, PBCH, PCFICH, PHICH,
PDCCH, PDSCH –30 dB to +0 dB relative to RS EPRE
PHICH –30 dB to –12 dB relative to RS EPRE
Signal quality
Error vector magnitude (EVM) global EVM for cell with
bandwidth = 20 MHz < 2 %, RMS
17 R&S ® CMW500 and R&S ® CMW280 only.