Atec Rohde-Schwarz-CMW500 - Manual (Page 37)

Version 11.00, May 2013
Rohde & Schwarz R&S ® CMW500 Wideband Radio Communication Tester 37
Bluetooth
®
specifications
Standard standard Bluetooth ® Core Specification
Version 2.1 + EDR,
Version 4.0 + LE
test standard Radio Frequency Test Specification
V1.2/V2.0/V2.0+EDR/V2.1/V2.1+EDR,
Bluetooth
® Low Energy RF PHY Test
Specification, RF-PHY.TS/4.0.1
Bluetooth
®
RF generator
(prerequisite: R&S ® CMW-B110A/R&S ® CMW-B110D option)
Frequency range Bluetooth ® 2402 MHz to 2480 MHz
Bluetooth ® WinIQSIM2™ (R&S ® CMW-KW610 option)
Arbitrary waveform file basic rate BLUETOOTH_11110000_DH5.WV
LAP: 123456, (PAR = 0.00 dB)
enhanced data rate (EDR) BLUETOOTH_PRBS9_3-DH5.WV
LAP: 123456, (PAR = 3.20 dB)
Output level range depending on PAR see general technical specifications
Output level uncertainty waveform files used:
BLUETOOTH_11110000_DH5.WV,
BLUETOOTH_PRBS_3-DH5.WV see general technical specifications
Output level resolution see general technical specifications
Signal quality
Modulation index uncertainty
basic rate,
frequency deviation ∆f1 max. = 160 kHz,
waveform file used:
BLUETOOTH_11110000_DH5.WV < 1 %
Differential error vector magnitude (DEVM) enhanced data rate,
waveform file used:
BLUETOOTH_PRBS9_3-DH5.WV
< 1.5 %, RMS
Bluetooth ® RF analyzer (R&S ® CMW-KM610 option)
Frequency range Bluetooth ® 2402 MHz to 2480 MHz
Statistics
Statistical count 1 to 1000
Values current, average, maximum, minimum,
standard deviation
Trigger
Trigger sources BT: IF power