Atec Rohde-Schwarz-CMW500 - Manual (Page 49)

Version 11.00, May 2013
Rohde & Schwarz R&S ® CMW500 Wideband Radio Communication Tester 49
WLAN signaling access point emulator 36
(prerequisite: R&S ® CMW-KS650, R&S ® CMW-KS651, R&S ® CMW-B200A,
R&S ® CMW-B270A options)
Standard IEEE 802.11a, g(OFDM), n
Physical layer mode OFDM
Frequency range WLAN IEEE 802.11n (2.4 GHz band),
WLAN IEEE 802.11g (OFDM),
(2.4 GHz band) 2412 MHz to 2484 MHz
WLAN IEEE 802.11a (5 GHz band),
WLAN IEEE 802.11n (5 GHz band),
prerequisite: R&S
® CMW-KB036 option
5180 MHz to 5825 MHz
Output level range
RF1 COM, RF2 COM 2.4 GHz band burst power (RMS) up to –16 dBm
5 GHz band burst power (RMS) up to –26 dBm
burst power (RMS) up to –16 dBm
(overranging)
RF1 OUT 2.4 GHz band burst power (RMS) up to –3 dBm
5 GHz band burst power (RMS) up to –13 dBm
burst power (RMS) up to –3 dBm
(overranging)
Output level uncertainty see general technical specifications
Output level resolution see general technical specifications
Modulation accuracy (EVM) 2.4 GHz band < –38 dB
5 GHz band < –38 dB
Minimum input level RF1 COM, RF2 COM down to –40 dBm
Physical layer OFDM
FFT size 64
Bandwidth 20 MHz
Cyclic prefix 800 ns
Physical layer mode SISO
Modulation IEEE 802.11a, g (OFDM) BPSK, QPSK, 16QAM, 64QAM
(bit rate: 6/9/12/18/24/36/48/54 Mbps)
IEEE 802.11n MCS 0 to 7
Channel coding BCC
Measurements
PER
Measurement range graphically displayed, stop on limit fail 0 % to 100 %
Payload mode data interval, payload size
Acknowledge type ACK
Data DL All 0,
All 1,
bit pattern: 0101,
bit pattern: 1010,
pseudo random,
PN9 to PN32
Mobile capabilities MAC address,
MAC version
36 R&S ® CMW500 and R&S ® CMW270 only.