Franklin Fueling Systems TS 550 evo Fuel Management System Programming Guide - Manual (Page 19)

19
Group Name
Parameter
Name
Parameter
Value
Description
Max
Characters
System ID Site Name (Site Name) Physical name of site. 40
Web UI URL (http://localhost/tsa) URL address of site. 40
ID Line 1 (blank) These lines should contain the physical address of the site. This
information will be used in the header of reports and to identify
site properties when using web UI.
40
ID Line 2 (blank) 40
ID Line 3 (blank) 40
ID Line 4 (blank) 40
ID Line 5 (blank) 40
System Configuration
Group Name Parameter Name
Parameter
Default
Description Range
System Configuration Technical Support Key (0) Enter the appropriate key number. 0-2
Enable Diagnostics (No) Enables the logging option. Yes/No
Modules Expected IO (0) These settings are preset by
ordered options. This value
represents the number of each
module installed. When a module
is installed, the console will open
more options base upon which
module is installed.
0-6
AC Input (0) 0-6
Relay (0) 0-6
Probe (0) 0-6
2-Wire Sensor (0) 0-6
3-Wire Sensor (0) 0-6
4-20mA Input (0) 0-6
Internal Printer (0) 0-1
LON (0) 0-1
DIM (0) 0-2
Console DTU (0) 0-1
Diagnostics Remote Logging Host (None)
IP address of a remote server to log
diagnostic data. (Contact Technical
Support for assistance)
External Printer Paper Size Letter (8.5" x 11") Sets paper size for external printer
Letter ((8.5” x 11”)
A4 (210 mm x 297 mm)