Franklin Fueling Systems T5 Tank Sentinel Programming Guide User Manual

Page 39

Manually Forcing Line Leak Tests

Lines MUST be calibrated and enabled prior to forcing leak tests.
1. To force a Line Leak test, press the

FMS button in the

Application Window.

2. Press the

Application Menu button.

3. Select the

Control button in the FMS Menu.

4. The

FMS Control Menu will display the systems

available for testing. To view control options for the

tanks system, press the

Lines button.

5. On the

FMS Line Control Screen, press the button that

corresponds with the tank to be tested.

6. Touch the screen to highlight the desired test, then

press the

checkmark to begin the testing process.