Franklin Fueling Systems T5 Tank Sentinel Programming Guide - Manual (Page 19)

15
Initial Console Configuration
Before the console can be used, an intial setup must first be performed. This portion of the guide will instruct you on how
to set custom parameters by navigating through the programming options and set up the TS-5 series console for the first
time.
Console Build Characteristics
Each console is custom ordered and built to customer specifications. That means that all of the hardware (modules) and
software options needed for your site are installed and tested. Before programming, check the status and version of each
module and verify that your purchased options are present.
1. At the Home Status screen, press System Application .
2. The System Status screen will appear. Here you can see a
module’s description, installed slot, operational status, and version.
3. Press the Application Menu button.
Identification – View to locate the System Serial Number, Ethernet
Address (not the same as IP address) Controller Serial number and
Date/Time of manufacture.
Options – Displays the current installed software options.
Configuration and Preferences
Configuration and Preferences include how information will be displayed and configuring the console for its location and
communication and access options.
Preferences Menu
Starting at the Home Menu, press the Main Menu button.
And then select Preferences .
Use the Preference tables on the following pages to select the menu options to be changed.