YSI Vertical Profiler Systems - Manual (Page 95)

YSI Profiler System USER Manual
You can monitor the progress by looking at the FTP Status window which indicates the number
of graphics left to transfer (see Figure 7-18). Any errors during transfer are displayed in the FTP
Error Information window.
To stop the transfer of graphics click the Run FTP switch to the OFF position. Click on Clear
Errors to clear the window once you have interpreted the errors.
You now have learned the learned the basics through descriptions and examples of how to use
YSI Profile Data Manager. Once you are set up and running practice using the setup and run
screens to analyze and manage data collected during your YSI depth profile studies. If you have
questions do not hesitate to contact YSI (refer to Appendix A for contact information).
YSI Environmental 669523 Rev B Page 7-14