YSI Vertical Profiler Systems - Manual (Page 10)

YSI Profiler System USER Manual
Section 2
Profile Routine
2.1 Software Installation
The Floating Profiler System comes with three PC-based software programs. The minimum
required PC operating system is Windows 2000, however we recommend Windows XP. Install
all three programs on a single computer for optimal performance. The following instructions
assume that drive D: is a CD-ROM drive on the computer to which the software is being
installed. If your drive letter is different, substitute the appropriate CD-ROM drive letter into
the instructions below.
Profile Wizard
Load the installation disk into the CD-ROM drive. This activates the Profile Wizard
Installation Utility. Follow the prompts on the screen to complete the installation.
Figure 2-1 Opening Screen for Profile Wizard Installation
If the screen shown above does not appear, go to the Windows system menu. Select Start | Run.
Type D:\Setup.exe in the open field, and then press OK.
During installation items are added to your computer’s Start menu under Programs | YSI |
Profile Wizard that start the wizard. If the default directories are used, Profile Wizard
YSI Environmental
669523 Rev B Page 2-1