YSI Vertical Profiler Systems - Manual (Page 114)

Appendix G
Data File Array Numbers
In the tables below array numbers are each matched with a description. These array numbers are
found in the Profile data file during a standard profile operation for template Version r4.10.
NOTE:
Improvements in the future may require changes and/or additions to the array number lists
below. Please contact Endeco/YSI if you are unsure of the version you have.
Standard Operations
Array No. Description
6 Depth sounder reading
60 Hourly MET reading
88 Finds the Profile sonde depth location
99 Profile time stamp – found at beginning and end of a profile
105 Profile sonde reading
160 Profile sonde hourly reading
241 Daily MET average
242 Daily MET maximum
243 Daily MET minimum
325 CR10X internal variables reading
400 Battery voltage warning
511 Error Code – indicates the error number that caused the profile to abort
During nonstandard operations (Debug operations) additional array numbers will be collected in
the data file. Below are some examples of the most frequently used array numbers.
Debug Operations
Array No. Description
1 Profiles sonde SDI12 reading
5 Profiles sonde RS232 reading
7 Updates the direction and the distance the sonde will move
8 Moving subroutine
91 Compass reading