YSI Vertical Profiler Systems - Manual (Page 47)

YSI Profiler System USER Manual
SET UP MODEM CONNECTION
Use the Add Root… button and the Add… button on the Setup screen to ‘build’ a
communications tree in the left field of the screen. As you see below you begin with
ComPort_1. Highlight the port, click on Add… (green plus sign) to show the Add Device
screen, and then click on a device (PhoneBase). Click on Add Now… and the ‘tree grows’.
You just established the first link in the communications setup. Notice at the bottom of the
screen it reads ‘Connect a PhoneBase to ComPort_1’.
If multiple ComPorts are shown under Place to Add Device (right field on screen), then click the
port location you prefer before clicking Add Now. Click the Close button.
YSI Environmental 669523 Rev B Page 4-2